Page 1 of 3
1/3 scale Sig Spacewalker build
Posted: Thu Apr 02, 2020 7:17 pm
by TSuppa
Finally received kit on March 19. Ordered in January. I have started building, since I have sheltered in place I have lots of time to work on it. I still have to go to different hospitals everyday to work but my evenings and weekends are spent at home or flying.
Thinking about naming it Covid.
Re: 1/3 scale Sig Spacewalker build
Posted: Thu Apr 02, 2020 7:20 pm
by TSuppa
Laminated main spars and started wing. Using a magnetic building board
Re: 1/3 scale Sig Spacewalker build
Posted: Thu Apr 02, 2020 7:22 pm
by TSuppa
More wing work
Re: 1/3 scale Sig Spacewalker build
Posted: Thu Apr 02, 2020 7:24 pm
by TSuppa
Wing most framed up
Re: 1/3 scale Sig Spacewalker build
Posted: Thu Apr 02, 2020 7:27 pm
by TSuppa
Started on Fuselage. Planning on using a Zenoah G62, so I had to push firewall back slightly.
Re: 1/3 scale Sig Spacewalker build
Posted: Thu Apr 02, 2020 7:28 pm
by TSuppa
Installed firewall
Re: 1/3 scale Sig Spacewalker build
Posted: Thu Apr 02, 2020 7:29 pm
by TSuppa
Formers installed and started on stringers
Re: 1/3 scale Sig Spacewalker build
Posted: Fri Apr 03, 2020 7:20 pm
by TSuppa
Thanks the building jigs come from Airfieldmodels.com. I like it much better than the old ceiling tile and pin method.
A little cold in the garage today but I got the top of the fuselage sheeted and cockpit cut out.
Re: 1/3 scale Sig Spacewalker build
Posted: Sat Apr 04, 2020 5:46 pm
by TSuppa
Formers and stringer installed .
Re: 1/3 scale Sig Spacewalker build
Posted: Mon Apr 06, 2020 4:14 pm
by TSuppa
Planning on using a Zenoah G62.
Worked on rudder and fin yesterday